Mdc-k120 Device for measuring the taper of a slab mold

Overview The taper of the narrow edge of the mold has an important influence on the quality of the casting blank. Excessive taper will compress the workpiece shell, while small taper will cause the air gap to increase. Due to the constant increase in quality requirements for casting blanks and the constant introduction of high-precision molds, modern taper measuring instruments in the domestic market tend to have low measurement accuracy and complex measurement methods, which limits production development. The new generation taper measuring instrument developed by Wuhan CenterRise M&C Engineering Co., Ltd. uses an imported high-precision tilt sensor combined with an ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of a narrow copper plate. mold. The tool is fully functional, easy to use and suitable for slab molds of various lengths. Most modern slab molds are single-tapered, narrow, flat copper plates. The amount of taper required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper gauge directly measures the angle between a narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the one-way shrinkage value of the upper and lower ports. Main Features 1. Easy to calibrate, stable performance, easy to operate. 2. Self-supporting, self-leveling, self-balancing. 3. High measurement accuracy. 4. LCD display data reading 5. Fast response, real-time display data reading. 6. Setting up a dynamic intelligent system. 7. Power supply with lithium battery, suitable for mobile on-site use. 8. Continuous measurement time is more than 36 hours. 9. The sensor is equipped with multiple protection features to meet the measurement needs of harsh on-site environments. 10. The weight of the whole system is less than 3.8kg, and it is equipped with a set of zero point calibration table, which is convenient for on-site installation and measurement. 11. Applicable to various arc, parabolic and straight shapes. Performance and Index 1. Measuring range: -3°~ +3° (measuring length can be customized according to user needs) 2. Measuring accuracy: 0.01mm. 3. Temperature range: -25℃~+85℃. 4. Linearity deviation: -0.03mm~+0.03mm. 5. Maximum use time after fully charged: >36 hours. 6. Maximum storage time after full charge: 2 months. Main components 1. Measuring instrument: central measurement and control unit, measuring sensor. 2. Measuring stand 3. Standard table: standard surface, support frame, level. sales@whzfy.com